|
Quick Links: MR16 MR11
G4 Tower G4H
G4V BA15D
BA15S Festoon
Adaptors
Invest
SAFELY in LED bulbs
FIRE RISK:
We are often asked about the potential risk of FIRE from LED bulbs
- is there any risk? Have a look at YOUTUBE and make your own
decision!
or Google this: "A US-based supplier
has recalled around 42,000 LED lamps that can pose a fire hazard"
We have been accused of scaremongering
about the safety of LED bulbs, well, on Saturday 5th November
(bonfire night by coincidence) we received three unprotected Ultra-bad
burnt-out LED bulbs from live-aboard boater JM of Suffolk. Of
the three bulbs one actually caused flames within the fitting,
one "popped" and the 3rd "Broke down & smoked".
Look at the picture below and decide yourself if there is any
fire risk! Needless to say these were not supplied by Bedazzled.

Like all other cabled electronic
equipment connected to a powerful source (e.g. leisure batteries),
LED bulbs should also be internally FUSED! This protects you,
your boat, caravan or motorhome from any risk of fire in the event
of the internal voltage regulator or current driver failing. It
also ensures that if one bulb fails short circuit, it doesn't
turn all your lights off when your main trip/fuse opens!
**** Only
Bedazzled LED bulbs are FUSED for safety!
****
Have you experienced failed LED
bulbs? The primary cause is Voltage Spikes which commonly show
the symptom of 'Twinkling' LEDs or groups of LEDs glowing dimly
(if at all). If your supplier will not honour a warranty (saying
that "it has been hit by voltage spikes") then the product
was NOT FIT FOR PURPOSE!
**** Only
Bedazzled LED bulbs are PROTECTED from
Voltage Spikes! ****
|
?
Did you know that each SMD LED used in our bulbs are equivalent to (at least) three of the old technology single LEDs supplied by many other suppliers!
?
Did you know that LED bulbs can fail SHORT
CIRCUIT which means every light on that circuit will go out when
your main fuse opens?
?
Did you know that LED bulbs can fail and
just overheat (but not draw enough power to take your main fuse/trip out) potentially causing smoke/fire?
?
Did you know that, uniquely,
Bedazzled provides protection from both the above in the form
of a small low power self-resetting fuse with every bulb?
|
-
MR16 - High Power LED lamp in Warm White
- EMI Free (No electrical
interference)
- Contains 15 High Brightness wide angle (5050) LEDs
- Lumens: 240L (Cool White); 210L (Warm White)
-
Wattage: 2.8W
-
Voltage: 10-30 volts DC (Harsh Environment
protected - withstands fluctuations and spikes)
- Measured Current draw at (12.7v):- 222ma
-
Suggested approximate replacement for 25W Halogen
bulb
- 120 degree wide angle floodlight
- Standard MR16 glass housing 50mm diameter
-
PROTECTED
by Internal Voltage Spike Suppressor
and fuse
|

Price
£10.00 each
|
-
MR11 - 10 x SMD (5050) LED lamp in Warm or
Cool White
- EMI Free (No electrical
interference)
- Lumens: 160L (Cool White); 140L (Warm White)
-
Wattage: 1.92W
-
Voltage: 10-30 volts DC (Harsh Environment
protected - withstands fluctuations and spikes)
- Measured Current draw at (12.7v):- 151ma
-
Suggested approximate replacement for 20W
Halogen bulb
- 120 degree wide angle beam
- Standard MR11 glass housing 35mm diameter
- PROTECTED by
Internal Voltage Spike Suppressor
and fuse
-
Please be aware that the LEDs could contact
'circlip' type fittings if not insulated! A short length
of sleeving is provided to insulate the ends of the circlip
if applicable
|

Price £7.50 each
|
-
MR11 - 6 x SMD (5050) LED lamp in Warm or
Cool White
- EMI Free (No electrical
interference)
- Lumens: 96L (Cool White); 84L (Warm White)
-
Wattage: 1.05W
-
Voltage: 10-30 volts DC (Harsh Environment
protected - withstands fluctuations and spikes)
- Measured Current draw at (12.7v):- 82ma
-
Suggested approximate replacement for 10W
Halogen bulb
- 120 degree wide angle beam
- Standard MR11 glass housing 35mm diameter
- PROTECTED by
Internal Voltage Spike Suppressor
and fuse
|
Price £6.00 each
|
-
MR11 - 4 x SMD (3 chip 3528) LED lamp in Warm
or Cool White
- Lumens: 64L (Cool White); 60L (Warm White)
-
Wattage: 1.2W
-
Voltage: 10-30 volts DC (in-built power
regulation)
- Current draw: 100ma approx
-
Suggested approximate replacement for 10W
Halogen bulb
- 90 degree wide angle beam
- Standard MR11 glass housing 35mm diameter
-
Includes seperate Voltage
Spike Suppressor and fuse for PROTECTION
|
Price £6.00 each
|
G4T-30L
PROTECTED
-
G4 Tower type bulb replacement - 30 SMT (5050)
LED lamp in Warm or Cool White
- Lumens: 330L (Cool White); 300L (Warm White)
-
Wattage: 3.1W
-
Voltage: 10-30 volts DC (Harsh Environment
protected - withstands fluctuations and spikes)
- Measured Current draw at (12.7v):- 241ma
-
Suggested approximate replacement for 30W
Halogen bulb
-
Bulb head diameter is 22mm, length 25mm
-
Ideal for Table Lamps and Oil Lamp style fittings
- especially with Adaptors
- PROTECTED by
Internal Voltage Spike Suppressor
and fuse
|
Price £16.00 each
|
G4T-24L
PROTECTED
-
G4 Tower type bulb replacement - 24 SMT (5050)
LED lamp in Warm or Cool White
- Lumens: 360L (Cool White); 310L (Warm White)
-
Wattage: 2.6W
-
Voltage: 10-30 volts DC (Harsh Environment
protected - withstands fluctuations and spikes)
- Measured Current draw at (12.7v):- 205ma
-
Suggested approximate replacement for 30W
Halogen bulb
-
Bulb head diameter is 23mm, length 30mm
-
Ideal for Table Lamps and Oil Lamp style fittings
- especially with Adaptors
- PROTECTED by
Internal Voltage Spike Suppressor
and fuse
|
Price £13.00 each
|
G4T-18La
PROTECTED
-
G4 Tower type bulb replacement - 18 SMT (5050)
LED lamp in Warm or Cool White
- EMI Free (No electrical
interference)
- Lumens: 266L (Cool White); 231L (Warm White)
-
Wattage: 2.5W
-
Voltage: 10-30 volts DC (Harsh Environment
protected - withstands fluctuations and spikes)
- Measured Current draw at (12.7v):- 191ma
-
Suggested approximate replacement for 25W
Halogen bulb
-
Bulb head diameter is 22mm, length 35mm
-
Ideal for Table Lamps and Oil Lamp style fittings
- especially with Adaptors
- PROTECTED by
Internal Voltage Spike Suppressor
and fuse
|
Price £8.50 each
|
-
G4 - 18 x SMD (5050) LED lamp in Warm or Cool
White
- EMI Free (No electrical
interference)
- Lumens: 270L (Cool White); 220L (Warm White)
-
Wattage: 2.7W
-
Voltage: 10-30 volts DC (Harsh Environment
protected - withstands fluctuations and spikes)
- Measured Current draw at (12.7v):- 207ma
-
Suggested approximate replacement for 30W
Halogen bulb
- 120' wide angle beam
- Dimensions 44.5mm diameter by 8mm depth
-
PROTECTED
by Internal Voltage Spike Suppressor
and fuse
|
Price £10.00 each
|
-
G4 - 15 x SMD (5050) LED lamp in Warm or Cool
White
- EMI Free (No electrical
interference)
- Lumens: 240L (Cool White); 210L (Warm White)
-
Wattage: 2.8W
-
Voltage: 10-30 volts DC (Harsh Environment
protected - withstands fluctuations and spikes)
- Measured Current draw at (12.7v):- 220ma
-
Suggested approximate replacement for 25W
Halogen bulb
- 120' wide angle beam
- Dimensions 44mm diameter by 8mm depth
-
PROTECTED
by Internal Voltage Spike Suppressor
and fuse
|
Price £9.00 each
|
-
G4 - 15 x SMD (5050) LED lamp in Warm or Cool
White
- Lumens: 177L (Cool White); 157L (Warm White)
-
Wattage: 2.4W
-
Voltage: 10-30 volts DC (Harsh Environment
protected - withstands fluctuations and spikes)
- Measured Current draw at (12.7v):- 187ma
-
Suggested approximate replacement for 25W
Halogen bulb
- 120' wide angle beam
- Dimensions 35mm diameter by 8mm depth
-
PROTECTED
by Internal Voltage Spike Suppressor
and fuse
|
Price £9.00 each
|
-
G4 - 12 x SMD (5050) LED lamp in Warm or Cool
White
- EMI Free (No electrical
interference)
- Lumens: 180L (Cool White); 160L (Warm White)
-
Wattage: 2.2W
-
Voltage: 10-30 volts DC (Harsh Environment
protected - withstands fluctuations and spikes)
- Measured Current draw at (12.7v):- 172ma
-
Suggested approximate replacement for 20W
Halogen bulb
- 120' wide angle beam
- Dimensions 30.5mm diameter by 8mm depth
-
PROTECTED
by Internal Voltage Spike Suppressor
and fuse
|

Price £8.00 each
|
-
G4 - 10 x SMD (5050) LED lamp in Warm or Cool
White
- EMI Free (No electrical
interference)
- Lumens: 165L (Cool White); 140L (Warm White)
-
Wattage: 1.85W
-
Voltage: 10-30 volts DC (Harsh Environment
protected - withstands fluctuations and spikes)
- Measured Current draw at (12.7v):- 145ma
-
Suggested approximate replacement for 20W
Halogen bulb
- 120' wide angle beam
- Dimensions 30mm diameter by 8mm depth
-
PROTECTED
by Internal Voltage Spike Suppressor
and fuse
|
Price £7.50 each
|
-
G4 - 9 x SMD (5050) Red Green & Blue LED
lamp (automatic colour changing )
-
Wattage: 1.2W
-
Voltage: 10-30 volts DC (in-built power regulation)
- Current draw: 106ma max
-
Suggested approximate replacement for 10W Halogen
bulb
- 120' wide angle beam
- Dimensions 30mm diameter by 8mm depth
-
Includes seperate Voltage
Spike Suppressor and fuse for PROTECTION
A few examples:
|

Price £7.50 each
|
-
G4 - 8 x SMD (5050) LED lamp in Warm or Cool
White
- EMI Free (No electrical
interference)
- Lumens: 123L (Cool White); 99L (Warm White)
-
Wattage: 1.3W
-
Voltage: 10-30 volts DC (Harsh Environment
protected - withstands fluctuations and spikes)
- Measured Current draw at (12.7v):- 103ma
-
Suggested approximate replacement for 13W Halogen
bulb
- 120' wide angle beam
- Dimensions 25mm diameter by 8mm depth
-
PROTECTED
by Internal Voltage Spike Suppressor
and fuse
|
Price £7.00 each
|
-
G4 - 6 x SMD (5050) LED lamp in Warm or Cool
White
- EMI Free (No electrical
interference)
- Lumens: 88L (Cool White); 87L (Warm White)
-
Wattage: 1.3W
-
Voltage: 10-30 volts DC (Harsh Environment
protected - withstands fluctuations and spikes)
- Measured Current draw at (12.7v):- 101ma
-
Suggested approximate replacement for 10W Halogen
bulb
- 120' wide angle beam
- Dimensions 23mm diameter by 8mm depth
-
PROTECTED
by Internal Voltage Spike Suppressor
and fuse
|
Price £5.50 each
|
-
G4 - 4 x SMD (3 chip 3528) LED lamp in Warm
or Cool White
- Lumens: 64L (Cool White); 60L (Warm White)
-
Wattage: 1.2W
-
Voltage: 10-30 volts DC (in-built power
regulation)
- Current draw: 100ma approx
-
Suggested approximate replacement for 10W
Halogen bulb
- 90' wide angle beam
- Dimensions 23mm diameter by 10mm depth
-
Includes seperate Voltage
Spike Suppressor and fuse for PROTECTION
|

Price £6.00 each
|
-
G4 - 15 x SMD (5050) LED lamp in Warm or Cool
White
- EMI Free (No electrical
interference)
- Lumens: 240L (Cool White); 210L (Warm White)
-
Wattage: 2.8W
-
Voltage: 10-30 volts DC (Harsh Environment
protected - withstands fluctuations and spikes)
- Measured Current draw at (12.7v):- 220ma
-
Suggested approximate replacement for 25W
Halogen bulb
- 120' wide angle beam
- Dimensions 44mm diameter by 8mm depth
- PROTECTED by
Internal Voltage Spike Suppressor
and fuse
|
Price £9.00 each
|
-
G4 - 12 x SMD (5050) LED lamp in Warm or Cool
White
- EMI Free (No electrical
interference)
- Lumens: 180L (Cool White); 160L (Warm White)
-
Wattage: 2.2W
-
Voltage: 10-30 volts DC (Harsh Environment
protected - withstands fluctuations and spikes)
- Measured Current draw at (12.7v):- 172ma
-
Suggested approximate replacement for 20W
Halogen bulb
- 120' wide angle beam
- Dimensions 30.5mm diameter by 8mm depth
-
PROTECTED
by Internal Voltage Spike Suppressor
and fuse
|

Price £8.00 each
|
-
G4 - 10 x SMD (5050) LED lamp in Warm or Cool
White with pins on back
- EMI Free (No electrical
interference)
- Lumens: 165L (Cool White); 140L (Warm White)
-
Wattage: 1.85W
-
Voltage: 10-30 volts DC (Harsh Environment
protected - withstands fluctuations and spikes)
- Current draw: 145ma
-
Suggested approximate replacement for 20W
Halogen bulb
- 120' wide angle beam
- Dimensions 30mm diameter by 8mm depth
-
PROTECTED
by Internal Voltage Spike Suppressor
and fuse
|
Price £7.50 each
|
-
G4 - 6 x SMD (5050) LED lamp in Warm or Cool
White
- EMI Free (No electrical
interference)
- Lumens: 88L (Cool White); 87L (Warm White)
-
Wattage: 1.1W
-
Voltage: 10-30 volts DC (Harsh Environment
protected - withstands fluctuations and spikes)
- Measured Current draw at (12.7v):- 83ma
-
Suggested approximate replacement for 10W
Halogen bulb
- 120' wide angle beam
- Dimensions 23mm diameter by 8mm depth
-
PROTECTED
by Internal Voltage Spike Suppressor
and fuse
|
Price £5.50 each
|
-
G4 - 4 x SMD (3 chip 3528) LED lamp in Warm
or Cool White
- Lumens: 64L (Cool White); 60L (Warm White)
-
Wattage: 1.2W
-
Voltage: 10-30 volts DC (in-built power regulation)
- Current draw: 100ma approx
-
Suggested approximate replacement for 10W
Halogen bulb
- 90' wide angle beam
- Dimensions 23mm diameter by 10mm depth
-
Includes seperate Voltage
Spike Suppressor and fuse for PROTECTION
|

Price £6.00 each
|
-
G4 - 15 x SMD (5050) LED lamp in Warm or Cool
White
- EMI Free (No electrical
interference) [Warm White only]
- Lumens: 240L (Cool White); 210L (Warm White)
-
Wattage: 2.8W
-
Voltage: 10-30 volts DC (Harsh Environment
protected - withstands fluctuations and spikes)
- Measured Current draw at (12.7v):- 220ma
-
Suggested approximate replacement for 25W
Halogen bulb
- 120' wide angle beam
- Dimensions 44mm diameter by 8mm depth with 28cm approx cable
- Ideal for converting flourescent light fittings to LED
- PROTECTED by
Internal Voltage Spike Suppressor
and fuse
|
Price £10.00 each
|
ADAPTORS:
We now stock a wide range of both PROTECTED
and unprotected adaptors - See bottom of this
page!
|
|
BA15D-30LT
PROTECTED
-
1142 (BA15D) type bulb replacement
-
30 SMT (5050) LED lamp in Warm or Cool White
- Dual pin contacts (case not connected)
- Lumens: 330L (Cool White); 300L (Warm White)
-
Wattage: 3W
-
Voltage: 10-30 volts DC (Harsh Environment
protected - withstands fluctuations and spikes)
- Measured Current draw at (12.7v):- 239ma
-
Suggested approximate replacement for 30W
Halogen bulb
-
Bulb head diameter is 22mm, length 25mm (45mm
inc base)
-
Ideal for Masthead (not BAY15D type) &
Oil Lamp style fittings
-
PROTECTED
by Internal Voltage Spike Suppressor
and fuse
|

Price £16.00 each
|
BA15D-18LT
PROTECTED
-
1142 (BA15D) type bulb replacement
- EMI Free (No electrical
interference)
-
18 SMT (5050) LED lamp in Warm or Cool White
- Dual pin contacts (case not connected)
- Lumens: 288L (Cool White); 252L (Warm White)
-
Wattage: 2.4W
-
Voltage: 10-30 volts DC (Harsh Environment
protected - withstands fluctuations and spikes)
- Measured Current draw at (12.7v):- 194ma
-
Suggested approximate replacement for 20W
Halogen bulb
-
Bulb head diameter is 22mm, length 35mm (55
inc base)
-
Ideal for Table Lamps & Oil Lamp style
fittings where light required 360 degrees
- PROTECTED by
Internal Voltage Spike Suppressor
and fuse
|

Price £9.00 each
|
-
BA15D - 15 x SMD (5050) LED lamp in Warm or
Cool White
- EMI Free (No electrical
interference)
- Lumens: 240L (Cool White); 210L (Warm White)
-
Wattage: 2.75W
-
Voltage: 10-30 volts DC (Harsh Environment
protected - withstands fluctuations and spikes)
- Measured Current draw at (12.7v):- 216ma
-
Suggested approximate replacement for 25W
Halogen bulb
- 120' wide angle beam
- Dimensions 44mm diameter by 8mm depth with 5cm approx cable
to connector
- Ideal for DOME light and many ceiling light fittings
- LED disk can be stuck in place using 'sticky fixers' or Hot-Melt
glue (not supplied)
- PROTECTED by
Internal Voltage Spike Suppressor
and fuse
|

Price £10.00 each
|
BA15D-9L
PROTECTED
-
1142 (BA15D) type lamp with 9 SMT (5050) LEDs
in Warm or Cool White
- Dual pin contacts (case not connected)
- Lumens: 144L (Cool White); 126L (Warm White)
-
Wattage: 2.2W
-
Voltage: 10-30 volts DC (Harsh Environment
protected - withstands fluctuations and spikes)
- Measured Current draw at (12.7v):- 175ma
-
Suggested approximate replacement for 20W Halogen
bulb
- 120 degree wide angle beam
-
PCB dimensions 40mm x 40mm
-
Ideal for Dome Lights
- LED disk can be stuck in place using 'sticky fixers' or Hot-Melt
glue (not supplied)
- PROTECTED by Internal
Voltage Spike Suppressor and fuse
|

Price £8.00 each
|
BA15D-6LT
-
1142 (BA15D) type bulb replacement
-
6 SMT (5050) LED lamp in Cool White only
- Dual pin contacts (case not connected)
- Lumens: 96L (Cool White)
-
Wattage: 1.3W approx
-
Voltage: 10-30 volts DC (in-built Buck power
regulation)
- Current Draw: 108ma
-
Suggested approximate replacement for 10W
Halogen bulb
-
Bulb head diameter is 25mm, length 29mm (49
inc base)
-
Ideal for Ceiling/Bulkhead and Oil Lamp style
fittings
- Includes seperate Voltage Spike Suppressor
and fuse for PROTECTION
|

Price £5.00 each
|
BA15D-4LS
-
1142 (BA15D) type spot lamp with 4 SMT (3
chip 3528) LEDs in Warm or Cool White
- Dual pin contacts (case not connected)
- Lumens: 64L (Cool White); 60L (Warm White)
-
Wattage: 1.2W Approx
-
Voltage: 10-30 volts DC (in-built Buck power
regulation)
- Current Draw: 100ma
-
Suggested approximate replacement for 10W
bulb
- 30 degree spotlight
-
Bulb head diameter is 27mm, length 18mm (38
inc base)
-
Ideal for Spotlight style fittings
- Includes seperate Voltage Spike Suppressor
and fuse for PROTECTION
|

Price £5.00 each
|
BA15S-30LT
PROTECTED
-
1156 (BA15S) type bulb replacement
-
30 SMT (5050) LED lamp in Warm or Cool White
- Single pin contact
- Lumens: 330L (Cool White); 300L (Warm White)
-
Wattage: 3W
-
Voltage: 10-30 volts DC (Harsh Environment
protected - withstands fluctuations and spikes)
- Measured Current draw at (12.7v):- 239ma
-
Suggested approximate replacement for 30W
Halogen bulb
-
Bulb head diameter is 22mm, length 25mm (45mm
inc base)
-
Ideal for Table Lamps & Oil Lamp style
fittings where light required 360 degrees
-
PROTECTED
by Internal Voltage Spike Suppressor
and fuse
|

Price £16.00 each
|
BA15S-18LT
PROTECTED
-
1156 (BA15S) type bulb replacement
- EMI Free (No electrical
interference)
-
18 SMT (5050) LED lamp in Warm or Cool White
- Single pin contacts (case connected)
- Lumens: 288L (Cool White); 252L (Warm White)
-
Wattage: 2.4W
-
Voltage: 10-30 volts DC (Harsh Environment
protected - withstands fluctuations and spikes)
- Measured Current draw at (12.7v):- 194ma
-
Suggested approximate replacement for 20W
Halogen bulb
-
Bulb head diameter is 22mm, length 35mm (55
inc base)
-
Ideal for Table Lamps & Oil Lamp style
fittings where light required 360 degrees
- PROTECTED by
Internal Voltage Spike Suppressor
and fuse
|

Price £9.00 each
|
-
BA15S - 15 x SMD (5050) LED lamp in Warm or
Cool White
- EMI Free (No electrical
interference)
- Lumens: 240L (Cool White); 210L (Warm White)
-
Wattage: 2.75W
-
Voltage: 10-30 volts DC (Harsh Environment
protected - withstands fluctuations and spikes)
- Measured Current draw at (12.7v):- 216ma
-
Suggested approximate replacement for 25W
Halogen bulb
- 120' wide angle beam
- Dimensions 44mm diameter by 8mm depth with 5cm approx cable
to connector
- Ideal for DOME light and many ceiling light fittings
- LED disk can be stuck in place using 'sticky fixers' or Hot-Melt
glue (not supplied)
- PROTECTED by
Internal Voltage Spike Suppressor
and fuse
|

Price £10.00 each
|
BA15S-9L
PROTECTED
-
1156 (BA15S) type lamp with 9 SMT (5050) LEDs
in Warm or Cool White
- Single pin contacts
- Lumens: 144L (Cool White); 126L (Warm White)
-
Wattage: 2.2W
-
Voltage: 10-30 volts DC (Harsh Environment
protected - withstands fluctuations and spikes)
- Measured Current draw at (12.7v):- 175ma
-
Suggested approximate replacement for 20W
Halogen bulb
- 120 degree wide angle beam
-
PCB dimensions 40mm x 40mm
-
Ideal for Dome Lights
- LED disk can be stuck in place using 'sticky fixers' or Hot-Melt
glue (not supplied)
- PROTECTED by
Internal Voltage Spike Suppressor
and fuse
|

Price £8.00 each
|
BA15S-6LT
-
1156 (BA15S) type bulb replacement
-
6 SMT (5050) LED lamp in Warm or Cool White
- Single pin contacts (case connected)
- Lumens: 96L (Cool White); 84L (Warm White)
-
Wattage: 1.3W Approx
-
Voltage: 10-30 volts DC (in-built Buck power
regulation)
- Current Draw: 108ma
-
Suggested approximate replacement for 10W
Halogen bulb
-
Bulb head diameter is 25mm, length 29mm (49
inc base)
-
Ideal for Ceiling/Bulkhead and Oil Lamp style
fittings
- Includes seperate Voltage Spike Suppressor
and fuse for PROTECTION
|

Price £5.00 each
|
BA15S-4LS
-
1156 (BA15S) type spot lamp with 4 SMT (3
chip 3528) LEDs in Warm or Cool White
- Single pin contacts
- Lumens: 64L (Cool White); 60L (Warm White)
-
Wattage: 1.2W Approx
-
Voltage: 10-30 volts DC (in-built Buck power
regulation)
- Current Draw: 100ma
-
Suggested approximate replacement for 10W
bulb
- 30 degree spotlight
-
Bulb head diameter is 27mm, length 18mm (38
inc base)
-
Ideal for Spotlight style fittings
-
Includes seperate Voltage
Spike Suppressor and fuse for PROTECTION
|

Price £5.00 each
|
FESTOON-42mm-3L
-
Festoon/Dome replacement - 3 SMT (5050) LED
lamp in Warm or Cool White
- Lumens: 52L (Cool White); 48L (Warm White)
-
Wattage: 0.66W Approx
-
Voltage: 10-30 volts DC (in-built Buck power
regulation)
- Current Draw: 55ma
-
Suggested approximate replacement for 6W bulb
-
Overall length: 42mm
-
Fits Dome or Festoon lights with 42mm bulb
fitting
-
Includes seperate Voltage
Spike Suppressor and fuse for PROTECTION
|

Price
£4.00 each
|
FESTOON-37mm-6L
-
Festoon/Dome replacement - 6 SMT (5050) LED
lamp in Warm White
- Lumens: 107L (Cool White); 97L (Warm White)
-
Wattage: 1.3W Approx
-
Voltage: 10-30 volts DC (in-built Buck power
regulation)
- Current Draw: 108ma
-
Suggested approximate replacement for 10W
bulb
-
Overall length: 37mm
-
Fits Dome or Festoon lights with 37mm bulb
fitting
-
Includes seperate Voltage
Spike Suppressor and fuse for PROTECTION
|

Price
£6.00 each
|
FESTOON-42mm-6L
-
Festoon/Dome replacement - 6 SMT (5050) LED
lamp in Cool White only
- Lumens: 107L (Cool White)
-
Wattage: 1.3W Approx
-
Voltage: 10-30 volts DC (in-built Buck power
regulation)
- Current Draw: 108ma
-
Suggested approximate replacement for 10W
bulb
-
Overall length: 42mm
-
Fits Dome or Festoon lights with 42mm bulb
fitting
-
Includes seperate Voltage
Spike Suppressor and fuse for PROTECTION
|

Price
£6.00 each
|
FESTOON-42mm-9L
-
Festoon/Dome replacement - 9 SMT (5050) LED
lamp in Warm White only
- Lumens: 145L (Warm White)
-
Wattage: 2W Approx
-
Voltage: 10-30 volts DC (in-built Buck power
regulation)
- Current Draw: 167ma
-
Suggested approximate replacement for 20W
bulb
-
Overall length: 42mm
-
Fits Dome or Festoon lights with 42mm bulb
fitting
-
Includes seperate Voltage
Spike Suppressor and fuse for PROTECTION
Awaiting new stock of Cool White
|

Price
£9.00 each
|
ES-ADAPTOR
-
ES (E27) Edison Screw type adaptor
- Single pin contact (case connected)
-
Adapts ES sockets to take G4 or MR11 type
LED bulbs
-
Note: When converting 230V light fittings,
always remove the mains plug & label '12v use only'
|

Price £2.00 each
|
SES-ADAPTOR
-
SES (E14) Small Edison Screw type adaptor
- Single pin contact (case connected)
-
Adapts SES sockets to take G4 or MR11 or
MR16 type LED bulbs
-
Note: When converting 230V light fittings,
always remove the mains plug & label '12v use only'
|

Price £2.00 each
|
B22-ADAPTOR
(aka BUS BULB)
-
B22 (BC) BUS BULB type adaptor
- Dual pin contacts (case not connected)
-
Adapts B22/BC sockets to take G4 or MR11
or MR16 type LED bulbs
-
Ideal for conversion of standard domestic
light fittings to 12v operation!
-
Please note that the orientation of the Socket
may vary in relationship to the bayonet pins
-
Note: When converting 230V light fittings,
always remove the mains plug & label '12v use only'
|

Price £2.00 each
|
B22-ADAPTOR
(aka BUS BULB) PROTECTED
-
B22 (BC) BUS BULB type adaptor with protection
- Recommended for non-protected LED bulbs
-
PROTECTED
by Internal Voltage Spike Suppressor
and safety fuse
- Dual pin contacts (case not connected)
-
Adapts B22/BC sockets to take G4 or MR11
or MR16 type LED bulbs
-
Ideal for conversion of standard domestic
light fittings to 12v operation!
-
Please note that the orientation of the Socket
may vary in relationship to the bayonet pins
-
Note: When converting 230V light fittings,
always remove the mains plug & label '12v use only'
|

Price £3.50 each
|
GU10-ADAPTOR
-
GU10 type adaptor
- Dual contacts
-
Adapts GU10 sockets to take G4 or MR11 type
LED bulbs
-
Ideal for conversion of standard domestic
light fittings to 12v/24v operation!
-
Please note that the orientation of the Socket
may vary in relationship to the GU10 pins
-
Note: When converting 230V light fittings,
always remove the mains plug & label '12v/24v use only'
|

Price £2.00 each
|
BA15D-ADAPTOR
-
1142 (BA15D) type adaptor
- Dual pin contacts (case not connected)
-
Adapts BA15D sockets to take G4 or MR11 or
MR16 type LED bulb
-
Please note that the orientation of the Socket
may vary in relationship to the bayonet pins
|

Price £2.00 each
|
BA15D-ADAPTOR
PROTECTED
-
1142 (BA15D) type adaptor
- Recommended for non-protected LED bulbs
-
PROTECTED
by Internal Voltage Spike Suppressor
and safety fuse
- Dual pin contacts (case not connected)
-
Adapts BA15D sockets to take G4 or MR11 or
MR16 type LED bulbs
-
Please note that the orientation of the Socket
may vary in relationship to the bayonet pins
|

Price £3.50 each
|
BAY15D-ADAPTOR
-
BAY15D type adaptor (Anchor & Masthead
fittings)
- Dual OFFSET pin contacts (case not connected)
-
Adapts BAY15D (offset bayonet pins) sockets
to take G4 or MR11 type LED bulbs
-
Please note that the orientation of the Socket
may vary in relationship to the bayonet pins
|

Price £2.00 each
|
|
|

Price £2.00 each
|
BA15S-ADAPTOR
PROTECTED
-
1156 (BA15S) type adaptor
- Recommended for non-protected LED bulbs
-
PROTECTED
by Internal Voltage Spike Suppressor
and safety fuse
- Single pin contact (case connected)
-
Adapts BA15S sockets to take G4 or MR11 or
MR16 type LED bulbs
-
Please note that the orientation of the Socket
may vary in relationship to the bayonet pins
|

Price £3.50 each
|
LV-SOCKET
-
Low Voltage socket with flying leads
- Ideal for DIY light fitting conversions (fits inside BS and
ES sockets)
-
Accepts G4 or MR11 or MR16 type bulbs
-
Size: 17mm diameter by 10mm deep with 135mm
(5 1/4") flying leads
-
Can be glued, cemented or screwed into place
|
Price £2.00 each
|